Specifications

Our design principles

The design of the Mobicon is unique, it is Australian designed and made and world-wide patents are awarded. The machine is of a two tower design and uses the container as a structural component when lifting a load. The result is a 35 tonne capacity, flexible container handler that can lift any form of ISO container from 20’ to 52’, flat racks and over-heights included.

Customs Brisbane etched for business cards

Technical Data & Dimensions
Internal Width 3.0 metres
External Width 4.5 metres
Lowered Height 3.6 metres
Raised Height 5.3 metres
Length without Container 7.2 metres
Tare Weight 13 tonne
Power Unit Hatz, oil cooled 60 HP diesel
Brakes Hydrostatic with fail-safe emergency braking
Drive Bosch Rexroth Group – Hydrostatic, 4-wheel drive
Pumps & Valves Bosch Rexroth Group
Electrical System 24 Vot. Dual, heavy duty batteries
Alternator 60 amp, heavy duty
Steering 4 wheel hydraulic steering with automatic

Alignment
Tyres 8 only, resilient tyres (solid)
Cabin Semi-open construction, with laminated

Windscreen
Window Internal, drop-down, slide window
Washers Front windscreen washers supplied
Safety Equipment  4 x camera, closed circuit TV system, with monitor in-cabin, one driving light, four corner mounted working lights, rear and front mounted rotating beacons and audible movement alarms. Restraint bar in operator’s cabin.

Performance Data
Capacity 35 tonne SWL
Container Types Any ISO Container, 20’ to 52’, over-heights,flatbeds, two pallet wide
Drive Speed 8.0km per hour
Gradeability 5% - may vary based upon ground conditions
Lift Height 1.75 metres
Lift Speed 2.0 metres per minute
Side Shift 200mm in either direction
Turning Diameter 20’ container – 22.0 metres. 40’ container – 38.0 metres
Cycle Time Typical cycle to load a container from the ground and onto a vehicle – 4.5 minutes

NB. The above specifications are subject to change, without notice

Servicing your Mobicon >