Specifications

 

Design

 
The design of the Mobicon is unique, it is Australian and world-wide patents are awarded. The machine is of a two tower design and uses the container as a structural component when lifting a load. The result is a 33 tonne capacity, flexible container handler that can lift any form of ISO container from 20’ to 52’, flat beds and over-heights included.
 

Technical Data and Dimensions *

 

Width:  Internal

3.0 meters

Width: External

4.65 meters

Height: Lowered

3.6 meters

Height: Raised

5.3 meters

Length: without container

7.2 meters

Tare Weight:

13 tonne

Power Unit: 

Deutz, oilcooled 60 HP diesel

Brakes:           

Hydrostatic with fail-safe emergency braking

Drive:  

Bosh Rexroth Group - Hydrostatic, 4-wheel drive

Pumps and Valves:

Bosch Rexroth Group

Hydraulic Cylinders:

Nordon Cylinders

Electrical System:

24 Volt. Dual, heavy duty batteries

Alternator:

60 amp, heavy duty

Steering:

4 wheel hydraulic steering with automatic alignment

Tyres:

8 only, resilient tyres. (solid)

Cabin:

Semi open construction, with laminated windscreen

Window:

Internal, drop down, slide window

Washers:

Front windscreen washers supplied

Safety Equipment:

3 x camera, closed circuit TV system, with monitor in cabin.
One driving light, and four corner mounted working lights.
Rear and front mounted rotating beacons and audible movement alarms.
Restraint bar in operator’s cabin.

 

Performance Data *

 

Capacity:

33 tonne SWL

Container Types:

Any ISO Container, 20’ to 52’, over-heights, flatbeds, two pallet wide.

Drive Speed:

9.0 km per hour

Gradeability:

5 % - may vary based upon ground conditions

Lift height:

1.75 meters

Lift Speed:

2.0 meters per minute

Side Shift:

200 mm in either direction

Turning Diameter:

20’ container, 22.0 meters
40’ container, 38.0 meters

Cycle Time:

Typical cycle to load a container from the ground and onto a vehicle. 4.5 minutes.

   
* Note: The above specifications are subject to change, without notice.